Duotone Kitesurf

Duotone Kitesurf

Duotone Kitesurf Thread Poly M100 (1cone/3000m) (SS20-onw)

Duotone Kitesurf

Duotone Kitesurf Back Pigtails Vegas (SS25-onw) (1pair)

Duotone Kitesurf

Duotone Kitesurf Front Pigtail set Vegas right/grey (SS25-onw)

Duotone Kitesurf

Duotone Kitesurf Front Pigtail set Vegas left/red (SS25-onw)

Duotone Kitesurf

Duotone Kitesurf Noseline Vegas (SS25-onw)

Duotone Kitesurf

Duotone Kitesurf Back Pigtail Y Neo SLS left/red (SS25-onw)

This Back Pigtail Y is intended for the left/red side of the NEO SLS kite. Please make sure that the model year of the Back Pigtail and the kite, as well as the size (m²), match. We always recommend replacing both sides to prevent the kite from flying unevenly to the left or right.

Duotone Kitesurf

Duotone Kitesurf Back Pigtail Y Neo SLS right/grey (SS25-onw)

This Back Pigtail Y is intended for the right/grey side of the NEO SLS kite. Please make sure that the model year of the Back Pigtail and the kite, as well as the size (m²), match. We always recommend replacing both sides to prevent the kite from flying unevenly to the left or right.

Duotone Kitesurf

Duotone Kitesurf Entity Ergo Pads (SS20-onw) (1pair)

Depending on the size selection, this item for the Entity Ergo binding includes: S: One pair (left and right) of Entity Ergo pads (foot cushions), suitable for shoe sizes 36–38 M: One pair (left and right) of Entity Ergo pads (foot cushions), suitable for shoe sizes 39–41 L: One pair (left and right) of Entity Ergo pads (foot cushions), suitable for shoe sizes 42–44 XL: One pair (left and right) of Entity Ergo pads (foot cushions), suitable for shoe sizes 45–47

Duotone Kitesurf

Duotone Kitesurf Repair STPU sand (SS19-onw)

Wing: Used for main tube tip seam reinforcements, canopy edge reinforcements, and stabilizer.

Duotone Kitesurf

Duotone Kitesurf Repair STPU plain (SS19-onw)

Wing: Used for batten pockets

Duotone Kitesurf

Duotone Kitesurf Lower Front Lines Click Bar(SS25-SS26)(1pair)

These lines for the CLICKBAR include: 1x Red Safety Line 1x Strong Middle Line (grey) 1x 12.6mm Metal Ring 1x Low V-Distributor With this set, you can replace your lower front lines – from the bar to the V-Distributor (12.6mm metal ring). Regardless of the desired final line length, the lower front lines are identical. PLEASE NOTE: after assembling the left and right lower frontlines the transition to the upper frontlines are not at the same position. It is important that after replacement, all lines are checked for the desired final length. They should be the same length with the depower fully open.

Duotone Kitesurf

Duotone Kitesurf Red Safety Line Click Bar (SS25-SS26)

This line for the CLICKBAR includes: 1x Red Safety Line In case your safety line is damaged, you can replace it with this item.

Duotone Kitesurf

Duotone Kitesurf 5th Line Minimalistic Pigtail (SS19-onw)

This item for the CLICKBAR includes: Depending on the size selected: 1x Blue 5th Line Pigtail 20cm 1x Blue 5th Line Pigtail 22.5cm 1x Blue 5th Line Pigtail 25cm 1x Blue 5th Line Pigtail 27.5cm 1x Blue 5th Line Pigtail 30cm 1x Blue 5th Line Pigtail 35cm Depending on how much your bar has been used, the length of the 5th line may not match the other front lines. To balance the difference, you can install pigtails of different lengths. It is important that after replacement, all lines are checked for the desired final length. They should be the same length with the depower fully open.

Duotone Kitesurf

Duotone Kitesurf Minimalistic Pigtails Back (SS17-onw)(1pair)

These lines for the CLICKBAR and TRUSTBAR include: depending on size selection: 1x pair of backline pigtails in 20cm, 22.5cm, 25cm, 27.5cm, 30cm or 35cm If you have a small difference in your line lengths, these pigtails for the backlines can help you compensate for that difference. Before ordering this set, take a look in your bar bag – in the extra compartment there are already spare pigtails included, which might help you to balance out the differences.

Duotone Kitesurf

Duotone Kitesurf Center Part Bearing w. Metal Plates (SS25-onw)

This article for CLICKBAR includes: Everything for the center section of the bar, where the TPU tube runs and is mounted on a rotation bearing. 2x Metal plates with hole 1x Center part bearing 2x Grub screw M4x6

Duotone Kitesurf

Duotone Kitesurf Sliding Bar Stopper Click Bar (SS17-onw)

This article for CLICKBAR includes 1x Sliding bar stopper ball with grub screw M5x6x3/32 (preassembled) This allows the bar to be stopped on the TPU tube at an individual height.

Duotone Kitesurf

Duotone Kitesurf TPU covered Depower Line Click Bar (SS25-onw)

This article for CLICKBAR includes: 1x preassembled TPU hose - with dyneema line and upper end hose cap 1x plastic head bushing - inserted into the loop of the dyneema line - lower end part TPU hose 1x guiding tool - to guide lines 1x spike tool - to place the bushing into the loop of the line

Duotone Kitesurf

Duotone Kitesurf Grab Handle (SS04-onw)

This item includes: 1× Grab handle 2× M6 × 11.2 cm screws The handle is usually supplied with the binding as standard.

Duotone Kitesurf

Duotone Kitesurf Entity Washers (SS12-onw) (4pcs)

This item for the Entity Ergo binding includes: 4x Entity washers (spacers) To mount the Entity Ergo binding onto the board, you need 2 washers per side. These washers allow you to adjust the angle of your binding on the board. They are included with the Entity Ergo as standard.

Duotone Kitesurf

Duotone Kitesurf Entity Strap Buckle Set (SS12-onw) (4pcs)

Depending on the size selection, this item is for the Entity Ergo binding: S: 4x angled buckles with a short base, for attaching the straps to the foot pad or L: 4x angled buckles with a long base, for attaching the straps to the foot pad or Flat: 4x straight buckles with a short base, for attaching the straps to the foot pad Depending on the instep height of your foot, you can adjust the buckles to achieve the optimal fit of your binding. The S buckles are included with the Entity Ergo as standard. If you are unsure which size provides the perfect fit, we recommend visiting a Duotone shop near you.

Duotone Kitesurf

Duotone Kitesurf Entity Snap Strap (SS20-onw) (1pair)

Depending on the size selection, this item for the Entity Ergo binding includes: S–M: One pair (left and right) of Entity Ergo straps, suitable for shoe sizes 36–41 L–XL: One pair (left and right) of Entity Ergo straps, suitable for shoe sizes 42–47

Duotone Kitesurf

Duotone Kitesurf Pressure Gauge for Multi Pump (SS23-onw)

Duotone Kitesurf

Duotone Kitesurf Release Pin Heart VI w. Bungee (SS23-onw)

This item for the CLICKBAR and TRUSTBAR includes: 1x release pin for Iron Heart VI with preassembled bungee – This component is built into the Iron Heart. If you’re unsure whether it needs to be replaced, please consult a dealer near you.

Duotone Kitesurf

Duotone Kitesurf Entity Heel Cushions (SS04-onw) (1pair)

Depending on the selection, this item for the Entity Ergo binding includes: Soft: 2x Entity heel cushions yellow = soft or Hard: 2x Entity heel cushions blue = hard You can insert heel cushions into the Entity Ergo binding to adjust the cushioning in the heel area – softer or harder. The Entity Ergo binding comes with red heel cushions of medium hardness as standard.